BUTTERFLY VALVES - Turkey

Z011-A EBRO ARMATUREN WAFER TYPE BUTTERFLY VALVES

Valve Brand : EBRO Armaturen ( German Made )
Valve Type : Butterfly Valve (Z011A Wafer Type, DIN2501 PN10-16
Body : Grey Cast Iron EN-JL1040 (old: GG 25)
Liner : E.P.D.M. (Ethylene Prophylene Rubber )
Disc ...

TEFLON PTFE VALVES - Turkey

PTFE seat, PTFE coated disk, high chemically resistant, double piece body butterfly valve.

VULCANISED SEAT VALVES - Turkey

Vulcanised seat butterfly valves for high vacuum applications.

GMX SEATED SOLID FLUID VALVE - Turkey

FEATURES
- Shut-off and controlling of strong abrasive media, e.g. sand,
cement, fl ue ash
- High abrasion strength of valve disc and seal
- Two-part body
- Triple shaft bearings prevent shaft defl ection and guarantee
optimum guidance even after many years of operational service
- Absolutely tight sealing with fl ow in either direction
- C...

HIGH PERFORMANCE VALVE - Turkey

HP111 EBRO ARMATUREN HIGH PERFORMANCE BUTTERFLY VALVES:

Valve Brand : EBRO Armaturen ( German Made )
Valve Type : Butterfly Valve (HP111-E,K1 Wafer Type, DIN2501 PN10,16,25,40 )
Body : Carbon Steel GS-C25N 1.0619 ( coating thickness: 20 mμ) or St. Steel CF8M (1.4408)
Seat Material : Metal, Inconel 625 or PTFE
Disc : St. ...

MECHANICAL OR INDUCTIVE SWITCH BOXES - Turkey

GENERAL NOTES
- Direct mounting according to VDI/VDE 3845. (EB4.1 - EB12.1)
- Bracket construction possible
- Small size due to compact design
- The operating voltage for the micro switch is freely selectable with
potential-free, change-over contacts
- Protection against mechanical damage due to sturdy design
- Cover with captive screws
- S...

SINGLE ACTING PNEUMATIC ACTUATORS - Turkey

EB-SYS EBRO ARMATUREN SINGLE ACTING PNEUMATIC ACTUATORS

Actuator Brand : EBRO Armaturen ( German Made )
Actuator Type : EB SYS Single Acting Actuator, DIN / ISO 5211 )
Piston Material : Aluminyum ( standard No. 3.2166 )
Cylinder Material : Aluminyum ( hard noised, standard No. 3.3206 )
End Covers : Aluminyum ( polyamid ...

SMART POSITIONERS - Turkey

TECHNICAL DATA
Operating voltages:
24 VDC +/- 10%
Setpoint setting:
0/4 to 20 mA and 0 to 5/10 V
Analogue feedback:
4-20 mA, 0-20 mA 0-10 V,
0-5 (optional)
Binary input:
1x galvanically isolated
Binary output:
2 Outputs (optional)
galvanically separated 100 mA
Operation:
Graphic display with backlight (EP 501)
Control medium:
Neutra...

ELECTRIC ACTUATORS - Turkey

TECHNICAL DATA-Types:E 50 - E 210Duty class:Class C acc. to prEN WI69000095 Valve interface:EN ISO 5211Actuation time:6 s - 180 sCorrosion protection:C4 acc. to prEN WI 6900095tested acc. to EN 600068-2-52Protection class:IP 67 acc. to EN IEC 60529Insulation class:FLimit switches:max. 250 V AC, 3A for DS-Actuatorsmax. 250 V AC, 3A for WS-Actuatorsm...

ADR CERTIFIED TANK TRUCK VALVE - Turkey

TECHNICAL DATA
Nominal diameter:
DN 80 / DN 100
Face-to-face:
EBRO works standard
Flange accommodation:
EN 1092 flanges for tank lorries
Flange Surface Design:
EN 1092 Form A/B
ASME RF, FF
Tightness check:
EN 12266 (Leakage rate A)
ISO 5208, Category 3
Temperature range:
-20°C to +160°C
(depending on pressure and medium)
Operating...

IMPELLER VALVE - Turkey

TECHNICAL DATA
Nominal diameter: DN 150 - DN 400
Face-to-face: EBRO works standard
Flange accommodation: EN 1092 PN 6/10/16
ASME Class 150
Marking: EN 19
Operating pressure: max. 6 bars
Temperature range: -20 °C to +100°C,
optional up to +250°C
Body: Light metal full flange with inserted ring
(stainless steel)
Impeller: Stainless stee...

KNIFE GATE VALVES - Turkey

TECHNICAL FEATURES: Nominal diameter:DN 50 - DN 600Face-to-face:EN 558-1 Series 20(≥ DN 350 company standard)Flange drilling:EN 1092 PN 10ASME Class 150Marking:EN 19Tightness check:EN 12266 (Leakage rate A)ISO 5208 Class ATemperature range:max. 120°CActuators:Hand wheel, ratchet wrench, chainwheel, bevel gear, pneumatic cylinder,electric motor, ...

SLURRY KNIFE GATE VALVES - Turkey

Knife gate valve SLV
Stafsjö’s knife gate valve SLV is a full bore valve with a unique seat
design that gives excellent flow characteristics and makes it particularly
suitable for the most demanding services with slurry and other
abrasive media. The SLV gives a tight shut-off independent of pressure
direction.
The SLV has an epoxy coated f...

SILO KNIFE GATE VALVES - Turkey

TECHNICAL FEATURES: Nominal diameter:DN 50 - DN 1200Face-to-face:Works standardFlange drilling:EN 1092 PN 10/16ASME Class 150Marking:EN 19Tightness check:EN 12266 (Leakage rate A)ISO 5208 Class ATemperature range:max. 300°C (depending on pressure,medium and material)Actuators:Hand wheel, ratchet wrench, chainwheel, bevel gear, pneumatic cylinder,e...

BALL VALVES - Turkey

BALL VALVES

V-BALL SEGMENT VALVES - Turkey

V-BALL SEGMENT VALVES

GATE VALVES - Turkey

GATE VALVES

GLOBE VALVES - Turkey

GLOBE VALVES

PINCH VALVES - Turkey

PINCH VALVES

DIAPHRAM VALVES - Turkey

DIAPHRAM VALVES

CHECKVALVES - Turkey

CHECKVALVES